Kits | Suggested Tools | Skill Level(1) |
---|---|---|
76001342, 76001343 | Safety Glasses, Torque Wrench |
Verify that all contents are present in the kit before installing or removing items from vehicle. | |||||
---|---|---|---|---|---|
Item | Qty | Description | Part No. | Notes | |
1 | 1 | Anti-vibration module | Not sold separately | ||
2 | 1 | Screw | Not sold separately |
1. | Figure 2 Remove screw (1) and phone interface (2) from phone mount. |
1. | Figure 2 Install anti-vibration module (4). | |
2. | Adjust phone position as desired. | |
3. | Install new screw (3). Tighten. Torque: 5 N·m (44 in-lbs) |
1 | Screw |
2 | Phone interface |
3 | Screw |
4 | Anti-vibration module |
1. | Turn handlebar lock to lock installation to verify that the phone carrier and phone do not interfere with fairings, gas tank, cables, lines, hoses, wiring or other equipment. | |
2. | Make sure that the phone does not obscure visibility of speedometer, hand controls, indicator lights or mirrors. |