Kits | Suggested Tools | Skill Level(1) |
---|---|---|
76001341 | Safety Glasses |
Verify that all contents are present in the kit before installing or removing items from vehicle. | |||||
---|---|---|---|---|---|
Item | Qty | Description | Part No. | Notes | |
1 | 1 | Phone carrier | Not sold separately |
1. | Figure 2 Align and insert tabs on mount phone interface (1) to slots on back of carrier (2). NOTE Gently pull on carrier to verify that it is properly installed and mount is locked. | |
2. | Turn carrier (2) a ΒΌ turn until carrier settles into next detent. | |
3. | Install phone. a. Figure 2 Open carrier (2) by pulling knob (3) out and turning counter-clockwise. b. Place phone into carrier (2). NOTE Gently pull on phone to verify that it is properly installed. c. Turn knob (3) clockwise until carrier is tight on phone. d. Push knob in. | |
4. | Adjust phone mount and phone orientation as needed for optimal access and viewing. |
1 | Interface, clutch mount |
2 | Universal phone carrier |
3 | Knob, adjustment |
1. | Turn handlebar lock to lock installation to verify that the phone carrier and phone do not interfere with fairings, gas tank, cables, lines, hoses, wiring or other equipment. | |
2. | Make sure that the phone does not obscure visibility of speedometer, hand controls, indicator lights or mirrors. |