0/0
FL CHROME BRAKE PEDAL COVER - 3 SLOT and 5 SLOT
J001031995-06-01
GENERAL
Kit Number
42478-95 (3 slot), 42557-95 (5 slot)
Models
These kits fit 1980 to 1996 FLHT, FLT, FLHR, FLHS models 1986 to 1996 FLSTC, FLSTN, FLSTF models.
Kit Contents
Table 1. Kit Contents
Description (Quantity)
Part Number
Kit 42478-95, 3 slot brake pedal cover
3 slot brake pedal cover
44227-95
3 slot rubber tread
44228-95
3 slot fastener
44229-95
Washer, flat
6422
Washer, offset
6421
Acorn Nut
7946
Kit 42557-95, 5 slot brake pedal cover
5 slot brake pedal cover
42558-95
5 slot rubber tread
44234-95
5 slot fastener
44232-95
Washer, flat
6422
Washer, offset
6421
Acorn Nut
7946
INSTALLATION
  1. Remove previously installed brake pedal cover from motorcycle.
  2. Align and place brake pedal cover over rubber tread.
  3. Insert bolt, with rubber logo properly aligned, into hole in combined new brake pedal cover and rubber tread.
  4. Place flat washer onto bolt.
  5. Place new brake pedal cover and bolt/washer assembly on brake pedal.
  6. Place offset washer on bolt.
  7. Adjust and hold offset washer in position covering exposed slot under brake pedal and attach acorn nut to bolt. Tighten acorn nut to 25-29 ft-lbs (33.8-39.3 Nm).