CHOPPED TOUR-PAK PASSENGER BACKREST PAD
J002072012-02-29
GENERAL
Kit Numbers
51635-06, 52031-96, 52032-96, 52033-96, 52435-05, 52519-03, 52621-09, 52898-98, 53024-03, 79192-10, 52300143, 52300294, 52300298, 52300299
Models
This kit fits motorcycles equipped with a Chopped Tour-Pak®.
Kit Contents
Table 1. Kit Contents
Description (Quantity) | Part Number |
|---|---|
Backrest pad | Not sold separately |
Flanged locknut, 1/4-20 (6) | 7716 |
INSTALLATION
Install the backrest pad on the Tour-Pak as follows:
| 1. | Align the six backrest pad studs with the existing drilled holes in the Tour-Pak. | |
| 2. | Fasten the backrest pad studs with the six 1/4-20 flanged locknuts included in the kit. Tighten the locknuts to 11 N·m (8 ft-lbs). | |
| 3. | Close the Tour-Pak cover and check for proper backrest alignment. |