0/0
FLHT Chrome Windshield Molding Kit
J003352013-11-01
GENERAL
Kit Number
59213-96
Models
For model fitment information, see the P&A retail catalog or the Parts and Accessories section of www.harley-davidson.com (English only).
Kit Contents
Table 1. Kit Contents
Quantity
Description
Part Number
3
Spacer
3673
1
Windshield molding
Not sold
3
Screws, Phillips, oval head, 1/4-20 x 1/2 in.
94539-96
NOTE
Part numbers for service parts are listed above.
INSTALLATION
  1. Insert three screws from kit into countersunk holes in molding.
  2. Slip rubber spacers from kit onto screws with countersunk end facing the molding.
  3. With a T27 Torx driver remove the three screws and washers at the bottom of the windshield. DO NOT REMOVE OUTER FAIRING.
  4. Align the windshield molding with the three mounting holes and thread screws into threaded inserts in inner fairing.
  5. Check that molding is aligned with top of outer fairing and tighten screws to 1.1–1.4 N·m (10–13 in-lbs).