0/0
Nostalgic Rider Footboard Kit
J007262013-11-01
GENERAL
Kit Number
50187-96
Models
For model fitment information, see the P&A retail catalog or the Parts and Accessories section of www.harley-davidson.com (English only).
Kit Contents
Table 1. Kit Contents
Quantity
Description
2
Footboard covers
INSTALLATION
  1. With left side operator footboard in up position, use a screwdriver to work rubber footboard cover collars out through the top of the footboard.
  2. Moisten kit footboard cover rubber collars with dishwashing soap to ease installation.
  3. With footboard in up position, firmly hold new footboard cover in installation position. From underside of footboard use a pliers to pull each rubber isolator into its footboard base hole until the thick collar emerges.
  4. Repeat procedures for right side footboard cover.
NOTE
Avoid the contact of chrome surfaces with abrasive materials (stones, sand, etc.) as damage will result.