7 Inch Headlamp Trim Ring

J013692014-02-05

GENERAL

Kit Number

69627-99, 69733-05, 61400293 and 61400295

Models

For model fitment information, see the P&A retail catalog or the Parts and Accessories section of www.harley-davidson.com (English only).

Kit Contents

Table 1. Kit Contents

INSTALLATION

1.	Loosen original equipment trim ring screw. NOTE If the original equipment trim ring screw is not loosened, the accessory trim ring will not fit properly.
2.	Slip new trim ring over original equipment trim ring. The lip on the back of the accessory ring should slip between headlamp housing and original equipment trim ring. NOTE See Figure 1. Screw and nut may need to be removed to allow trim ring to slip over original equipment trim ring. Position mounting screw of accessory trim ring at bottom of headlamp.	Figure 1. Headlamp Trim Ring
3.	Tighten original equipment ring screw.
4.	Tighten accessory trim ring screw.