0/0
SOFTAIL FRAME INSERTS / PIVOT BOLT COVERS
J017382007-09-25
GENERAL
Kit Number
48452-00
Models
For model fitment information, please see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com (English only).
Kit Contents
See Figure 1 and Table 1.
INSTALLATION
1. Use rubbing alcohol to clean the frame surface, pivot bolt, and pivot nut.
2. Place the larger left-side pivot cover (6) over the pivot nut. Position the set screw (5) at the bottom of the cover. Torque the screw to 1.8 N·m (16 in-lbs).
3. Remove adhesive backing from the inside of the right side pivot-bolt cover (4). Press the pivot bolt cover into position.
4. Remove adhesive backing and apply the left side adhesive (7) to the inside of the left-side trim plate (2).
5. Remove adhesive backing and apply the left side adhesive to the depression in the frame. Apply pressure to the trim plate and adhesive on the frame for one minute.
6. Repeat Steps 4 and 5 for the right side of the frame.
SERVICE PARTS
Figure 1. Service Parts: Softail Frame Inserts and Pivot Bolt Covers
Table 1. Service Parts: Softail Frame Inserts/Pivot Bolt Covers
Item
Description (Quantity)
Part Number
Item
Description (Quantity)
Part Number
1
Right side trim plates
Not Sold Separately
5
Set screw
3229
2
Left side trim plates
Not Sold Separately
6
Left pivot cover
Not Sold Separately
3
Right side adhesive
Not Sold Separately
7
Left side adhesive
Not Sold Separately
4
Right pivot cover
Not Sold Separately