Clear/Smoked Domed or Flat Turn Signal Lens Kits
J024362013-11-01
GENERAL
Kit Numbers
69305-02, 69306-02, 69307-02, 69308-02
Models
For model fitment information, see the P&A retail catalog or the Parts and Accessories section of www.harley-davidson.com (English only).
NOTE
A Service Manual for your motorcycle is available from your Harley-Davidson Dealer.
INSTALLATION
| 1. | See Figure 1. Remove existing turn signal lenses and discard. Retain lens mounting screws for installation. | |||||||||||
| 2. | Remove bulbs from turn signal assemblies. | |||||||||||
| 3. | Obtain new amber bulbs from kit. Install bulbs marked 1157A (Dual Filament) to the front turn signal assemblies. Install bulbs marked 1156 (Single Filament) to the rear turn signal assemblies. | 
Figure 1. Flat and Domed Lens Turn Signals | ||||||||||
| 4. | See Figure 1. Using screws saved during removal, install the new turn signal lenses to front and rear turn signal assemblies. | |||||||||||
| 5. | Check turn signals for proper operation. |
Figure 2. Service Parts
Table 1. Service Parts
Item | Description (Quantity) | Part Number |
|---|---|---|
Kit 69307-02 | ||
1 | Clear lens, flat, front and rear (4) | 69328-02 |
Kit 69308-02 | ||
2 | Smoked lens, flat, front and rear (4) | 69329-02 |
3 | Bulb, amber (front) double filament (2) | 69331-02 |
4 | Bulb, amber (rear) single filament (2) | 69330-02 |
Kit 69305-02 | ||
1 | Clear lens, domed, front and rear (4) | 69326-02 |
Kit 69306-02 | ||
2 | Smoked lens, domed front and rear (4) | 69327-02 |
3 | Bulb, amber (front) double filament (2) | 69331-02 |
4 | Bulb, amber (rear) single filament (2) | 69330-02 |