1. | Disconnect the negative (-) battery cable from the battery. Disconnect the positive (+) battery cable from the battery. | |
2. | Follow the procedure found in the Service Manual to remove the hardware from the transmission top cover, bearing housing assembly and clutch release cover. | |
3. | Consult the Service Manual for screw locations, torque values and recommended gasket replacement. | |
WARNING Connect positive (+) battery cable first. If positive (+) cable should contact ground with negative (-) cable connected, the resulting sparks can cause a battery explosion, which could result in death or serious injury. (00068a) | ||
4. | Connect the positive (+) battery cable to the battery. Connect the negative (-) battery cable to the battery. NOTE Items 3, 4, 5 and 6 in the Service Parts table are shipped with LOCTITE® Threadlocker applied. If replacement screws are ordered, apply LOCTITE Threadlocker 243 (blue) (Harley-Davidson Part Number 99642-97) to the threads before installing. |
Item | Description (Quantity) | Part Number |
---|---|---|
1 | Washer, chrome, 0.255/0.270 I.D. x 0.415/0.430 O.D. x 0.06 inch thick (12) | 94062-03 |
2 | Washer, chrome, 0.344 I.D. x 0.688 O.D. x 0.062 inch thick (4) | 94070-03 |
3 | Screw, chrome, 5/16-18 x 1.25 inch long (4) | 94335-91TS |
4 | Screw, chrome, 1/4-20 x 1.125 inch long (1) | 94308-93TS |
5 | Screw, chrome, 1/4-20 x 1.25 inch long (4) | 94315-91TS |
6 | Screw, chrome, 1/4-20 x 2.25 inch long (7) | 94319-91TS |