Quantity | Description | Part Number |
---|---|---|
1 | Bag, frame | 94204-03 |
3 | Protectors, frame | Not sold |
1 | Protectors, frame 1.5 x 7.0 in. strip | Not sold |
1. | See Figure 1. On left side of frame below seat, position frame bag and note the areas where Velcro straps will wrap around frame tubes (1). Obtain the 3 protective strips from kit. Peel off adhesive backing and place strip at each of the frame tube locations. |
Figure 1. Install Protective Tape | ||||
2. | Obtain the 1.5 in. x 7.0 in. protective strip from kit, peel off adhesive backing and apply to chrome belt guard as shown (2). | |||||
3. | See Figure 2. Position frame bag (1) with Harley-Davidson shield "up" (2) and wrap each of the Velcro straps (3) around the corresponding frame tube. NOTE Maximum Capacity of the Frame Bag is 2.3 lbs. (1.04 kg). Do not exceed the recommended weight. |
1 | Frame bag |
2 | Harley-Davidson shield orientation |
3 | Velcro strap location |
4 | Protective strip location |