RIDER FOOTBOARD KIT
J031712024-04-25
GENERAL
Kit Number
50634-05, 50500158
Models
For model fitment information, see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com (English only).
NOTE
There may be decreased access to the jiffy stand tab on Softail models.
Kit Contents
This kit contains the following items:
Table 1. Service Parts Table
Kit | Item | Description (Quantity) | Part Number |
|---|---|---|---|
Kit 50634-05 | 1 | Footboard assembly (right) | 50698-05 |
2 | Footboard assembly (left) | 50699-05 | |
3 | Shoulder bolt, 1/4-20 x 1-3/32 in. (4) | 50674-05 | |
4 | Lock nut, flanged, 1/4-20 (4) | 7716 | |
Kit 50500158 | 1 | Footboard assembly (right) | 50500159 |
2 | Footboard assembly (left) | 50500160 |
| 1 | Left-side footboard |
| 2 | Right-side footboard |
Figure 1. Footboard Installation
INSTALLATION REQUIREMENTS
FLTRXSTSE models: Separate purchase of Front Support Mounts (Part No. 47200202A - qty of 2) is required. See service manual for removal of old front supports and install of new supports.
INSTALLATION
| 1. | Remove the two hinge bolts and locknuts attaching the existing footboard to the mounting brackets, and remove the footboard. a. For kit 50634-05, discard stock bolts and locknuts. | |
| 2. | Clean and inspect the footboard brackets, and replace if worn, rusted or damaged. | |
| 3. | See Figure 1. Set the correct footboard in place over the mounting brackets. Line up the holes and install the shoulder bolts and locknuts from the kit. Tighten.
Torque: 9–12 N·m (7–9 ft-lbs) a. Kit 50500158, use stock shoulder bolts and nuts. | |
| 4. | Check that the footboard pivots freely on the hinge bolts. | |
| 5. | Repeat for the opposite side. |
NOTE
Avoid contacting chrome surfaces with abrasive materials (stones, sand, etc.) as damage will result