0/0
GEAR SHIFTER SHAFT COVER
J036152005-02-11
GENERAL
Kit Number
35471-05
Models
This kit fits 1982 and later Touring and FL Softail model motorcycles.
Kit Contents
Table 1. Kit Contents
Description (Quantity)
Part Number
Gear shifter shaft cover
Not Sold Separately
Screw, set
Not Sold Separately
There are no Service Parts available with this kit.
INSTALLATION
  1. Remove the stock heel shift lever from the gear shifter shaft.
  2. Install the set screw into the gear shifter shaft cover.
  3. Install gear shifter shaft cover with installed set screw over the end of the gear shifter shaft.
  4. Tighten the set screw until light contact is made with the shaft groove.
  5. Loosen the set screw slightly to allow the gear shifter shaft cover to rotate. Rotate the cover until the set screw faces down, then tighten the set screw.