1 | License plate |
2 | Clamp |
3 | License plate bracket |
4 | Reflector bracket |
5 | Screw (2) |
6 | Reflector |
7 | Bolt |
8 | Washer |
9 | Nut |
1 | Screw (4) |
2 | Washers (4) |
1 | T-Studs |
1. | See Figure 4. Attach Bobtail Support Bracket (3) from kit, and LED taillight housing using four previously removed screws (1), and washers (2) as shown. Tighten screws to 20.3–27.1 N·m (15–20 ft-lbs). |
1 | Screw (4) |
2 | Washer (4) |
3 | Bobtail Support Bracket |
1 | Clip (2) |
1 | Reflector |
2 | Reflector Bracket |
3 | Double sided foam tape |
2. | See Figure 7. Attach reflector bracket (2) (assembled in previous step) to lower portion of license plate (3) using hardware from License Plate Mounting Kit 94109-95 or similar. Tighten screws to 3.4–5.6 N·m (30–50 in-lbs). | |
3. | See Figure 7. Loosely attach previously removed clamp (4) to Bobtail Support Bracket (1) using previously removed bolt (7), washer (5), and nut (6). | |
4. | See Figure 7. Attach license plate (3) to Bobtail Support Bracket (1) using hardware from License Plate Mounting Kit 94109-95 or similar. Tighten screws to 3.4–5.6 N·m (30–50 in-lbs). | |
5. | See Figure 7. Secure clamp (4) to license plate (3) by tightening nut to 6.8–10.2 N·m (60–90 in-lbs). |
1 | Bobtail Support Bracket |
2 | Reflector Bracket |
3 | License Plate |
4 | Clamp |
5 | Washer |
6 | Nut |
7 | Bolt |
Item | Description (Quantity) | Part Number |
---|---|---|
1 | Bobtail Support Bracket | Not Sold Separately |
2 | Reflector Bracket | Not Sold Separately |
3 | Clip, adhesive backed (2) | 10102 |
4 | Tape, doubled sided, foam | 53791-06 |
Items mentioned in text, but not included in kit: | ||
A | Reflector | 59988-72A |