FRONT AXLE NUT COVER KIT
J048192008-09-25
GENERAL
Kit Number
47646-09
Models
For model fitment information, see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com (English only).
WARNINGRider and passenger safety depend upon the correct installation of this kit.
If the procedure is not within your capabilities or you do not have the correct tools, have a Harley-Davidson dealer perform the installation.
Improper installation of this kit could result in death or serious injury. (00308b)
Kit Contents
Figure 1. Front Axle Nut Cover Kit
Table 1. Kit Contents
Item | Description (Quantity) | Part Number |
|---|---|---|
1 | Cover, front axle nut, left (with spacer) | 42144-09 |
Cover, front axle nut, right | 42154-09 | |
2 | Screw, set, #10-24 x 0.31 inch cup point, thread lock (4) | Not Sold Separately |
3 | Hex wrench, 3/32 (not shown) | Not Sold Separately |
INSTALLATION
NOTE
Left side axle cover has a press-fit spacer installed.
- Install left side axle nut cover over the axle nut side of axle.
- Install right side cover over round side of axle.
- Install and tighten four set screws (2) securely.