SOFTAIL PASSENGER FOOTPEG SUPPORT KIT
J048912009-01-30
GENERAL
Kit Number
50454-09
Models
For model fitment information, see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com (English only).
Additional Parts Required
Mini-Footboard kit (P/N 50451-09)
Kit Contents
| 1 | Bracket |
| 2 | Support |
Figure 1. Kit Contents
Table 1. Kit Contents
Item | Description (Quantity) | Part Number |
|---|---|---|
1 | Passenger footpeg bracket (2) | Not Sold Separately |
2 | Passenger footpeg support (2) | Not Sold Separately |
Items mentioned in text, but not included in kit. | ||
A | Mini footboard assembly, left | |
B | Mini footboard assembly, right | |
There are no service parts for this kit.
WARNINGFootrests must fold up and toward rear of motorcycle if struck. Failure to set footrests to fold up and back could result in death or serious injury. (00366a)
INSTALLATION
Remove Existing Equipment
- Remove existing footpeg and attaching hardware and save for later use.
- Remove chrome swingarm pivot covers, if so equipped.
- Do not remove tool box, if so equipped.
Install Passenger Footpeg Support Kit
NOTE
Make sure the orientation of the support allows the peg to fold up and back.
- See Figure 2. Install footpeg brackets (1) and mounts (2) as follows:
- Position footpeg bracket (1) and insert screw (3), removed previously, through support (2) and into footpeg mounting hole in frame.
- Position semi-circular cutout in bracket extending from side of mount around nut of swingarm pivot bolt or nut.
- Tighten screw (3) to 45-50 ft-lbs (61-67.8 Nm).
- Refer to appropriate I-Sheet for instructions to install the footboards (A) and (B) and pivot pins for your motorcycle.
| 1 | Bracket |
| 2 | Footpeg mount |
| 3 | Screw |
Figure 2. Install Brackets and Footpeg Mounts