0/0
LOOP CHAIN AND DISC BRAKE AND ROTOR LOCK
J051612022-01-18
GENERAL
Kit Number
94869-10A
Models
U-lock can be used to secure front or rear slotted brake discs or secure theft protection chains.
Kit Contents
Kit includes a chain, lock, one lighted key and two standard keys.
A reminder cord (46318-04) is available for separate purchase.
INSTALLATION
NOTE
Insert key all the way to bottom of cylinder. Turn key clockwise 180 degrees to open position. DO NOT FORCE KEY. Key should turn freely. If key does not freely rotate, try turning key slightly left and right while inserted in lock to align disks inside lock cylinder. Failure to insert key all the way to bottom of cylinder could cause key to jam.
Key cannot be removed from key cylinder when in "unlock" position.
Securing Brake Disc or Rear Sprocket
  1. Insert key into lock and turn to unlock position. Remove U-lock.
    2. NOTE
    If U-lock will not fit through front brake disc, install it through rear rotor or rear sprocket.
  2. See Figure 1 and Figure 2. Insert U-lock through slot in a front or rear brake disc or rear sprocket.
    3. NOTE
    A reminder cord is not included with this kit, but is available for separate purchase (46318-04).
  3. Install reminder cord (3) over U-lock, if equipped.
  4. Install chain (4) over U-lock.
  5. Install lock onto U-lock. Turn key to lock position and remove.
    6. NOTE
    For Springer models, roll motorcycle forward slowly until lock gently contacts rocker.
  6. Roll motorcycle forward slowly until lock gently contacts caliper or sprocket belt guard.
  7. After installing disc lock, place loop end of reminder cord over handlebar grip, if equipped.
1Lock
2Caliper
3Reminder cord (sold separately)
4Chain (loop chain style shown)
Figure 1. Brake Disc Installation Shown (Sprocket Installation Similar)
Figure 2. Rear Sprocket Installation
Securing Chain Through Frame
  1. See Figure 3. Install chain through vehicle frame and through front wheel or around an immovable object.
  2. Insert key into lock and turn to unlock position. Remove U-lock.
  3. Install chain over U-lock.
  4. Install reminder cord over U-lock.
  5. Install lock onto U-lock. Turn key to lock position and remove.
  6. After installing, place loop end of reminder cord over handlebar grip.
Figure 3. Secure Chain Through Frame
SECURING MOTORCYCLE
Attach Harley-Davidson® U-lock to front or rear rotor/disc or drive belt sprocket making sure wheel cannot freely rotate. Position lock keeping it raised off the ground with key mechanism facing downwards to prevent thieves from attempting to leverage or crush lock.
  • Lock motorcycle in well lit areas.
  • Create a snug fit with frame and or wheels so that there is little room in chain for thieves' tools to get leverage.
  • If possible, it is always best to use a security chain or cable to lock motorcycle to an object that is securely bolted or cemented to the ground, and that has something affixed to the top to prevent thieves from lifting lock over the top of the object.
  • Do not lock objects that can be easily cut, such as small trees, aluminum or wooden posts or chain link fences.
  • Do not lock motorcycle in the same area all the time.
  • Keep motorcycle locked at all times.
  • Do not leave motorcycle unguarded without being locked.
KEY SAFE-FREE KEY REGISTATION AND KEY REPLACEMENT PROGRAM
For as long as the customer owns the lock, if keys are lost and key number has been registered with Kryptonite, Kryptonite will send first pair of standard replacement keys for FREE. To register keys, complete form on Kryptonite’s website at Kryptonitelock.com
CARE AND MAINTENANCE
NOTE
Do not use WD-40®.
WD-40 is a solvent, not a lubricant and will remove lubricant in cylinder.
Lubricate lock several times a year to keep lock in optimum working condition. Always use a lubricant that has a silicone, graphite or Teflon™ base.
1. Face lock cylinder upright.
2. Spray or pour lubricant into cylinder.
3. Let sit for 5 minutes.
4. Place a rag on workstation.
5. Turn lock over onto rag for a few minutes.
LIGHTED KEY:
If lock comes with a lighted key:
CHANGE BATTERIES: Remove both screws, lift off key cover and replace batteries (two 1.5v lithium batteries (AG10, 389, 189, LR1130 or LR54) with "+" facing up. Make sure contact spring is properly fitted into underside of button and replace both key cover screws.
REMOVE AND/OR REPLACE KEY BLADE FROM LED CASE: Turn LED case over to backside and unscrew two screws. Hold LED case in one hand, then pull upwards on key ring of Key Blade to completely remove.
INSTALL A NEW KEY BLADE INTO LED CASE: Slide Key Blade into opening of LED case until you hear a click. Be sure stamp key code area is facing you. Insert two screws and tighten clockwise.
LIFETIME LIMITED PRODUCT WARRANTY:
Schlage Lock Company, LLC, through its Kryptonite division (“Kryptonite”) extends a limited lifetime warranty to original user of products manufactured by Kryptonite (“Products”) against defects in material and workmanship. This warranty only applies to Original User of Products. This warranty is not transferable. This warranty gives you specific legal rights, and you may also have other rights, which vary from location to location. For complete warranty information and additional terms and conditions please visit Kryptonite’s website at www.kryptonitelock.com or call Kryptonite at 1-800-729-5625 (USA Only) or 001 781-828-6655. To contact Kryptonite, go to www.kryptonitelock.com or call 1-800-SAY-LOCK (USA Only) or 001 781-828-6655.
ANTI-THEFT PROTECTION OFFER (ATPO):
Kryptonite’s Anti-Theft Protection Offer (“Offer”) is an optional Offer that reimburses registered customers up to a specific monetary amount in the event their bike or powersport vehicle is stolen due to unintended opening or breaking of lock by force. ATPO is available to customers who purchase certain U-locks, chains, disc locks and folding locks (ATPO noted on package and on website) in the following countries: Austria, Belgium, Bulgaria, Canada, Croatia, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Israel, Italy, Latvia, Lithuania, Luxembourg, Netherlands, Norway, Poland, Portugal, Romania, Slovenia, Spain, Sweden, Switzerland, United Kingdom, and the United States. To locate ATPO protection amount, look for sticker on front of Kryptonite lock package or check product page on Kryptonite’s website ( kryptonitelock.com ). To be eligible a customer must register online at Kryptonite website ( kryptonitelock.com ) within 30 days of lock purchase. All reimbursements under such Offer are subject to Kryptonite Offer’s terms and conditions.
To register, visit Kryptonite’s website and click on “Register for Anti-Theft Protection” button on homepage of Kryptonitelock.com site.
If a customer does not have internet access, they may request registration documents by contacting Kryptonite in the United States via phone at 800-SAY-LOCK (729-5625) or 001 781-828-6655. Following information is required for registration: Customer contact details, lock information including a copy of itemized receipt of purchase, key number of subject lock, vehicle information including vehicle type (bike/powersport), base cost, serial #, an itemized copy of bill of sale, and an image of bicycle or powersport vehicle.
NOTE
If a customer has a custom or used bike or powersport vehicle and does not have a copy of bill of sale, please provide an appraisal from a dealer that reflects current value of bike or powersport vehicle.
Registration fees range from $9.99 for a one (1) year period to $29.99 for a five (5) year period. Products designed by Kryptonite as High & Ultimate security products are free to register for one (1) year and range up to $24.99 for five (5) years. If eligible (based on Offer terms and conditions), Kryptonite will reimburse customer lesser of 1) base cost of bike or powersport vehicle, excluding tax and accessories, in accordance with amount listed for subject lock; or 2) theft deductible under any applicable insurance policy.
REMINDER
Cables and accessories are NOT covered under this Offer. If a customer purchases a U-lock/cable combination pack, U-lock is the only product covered under this Offer. Any theft occurring with cable is not covered, as the cable is a secondary deterrent. See product packaging for specific details on proper use of this type of product.
For additional information regarding this Offer, please check out Kryptonite’s ATPO FAQ section at kryptonite.zendesk.com. Questions may be submitted to Kryptonite through its website at kryptonitelock.com , or stop by a local independent bicycle or powersport dealer.