CHROME WATER PUMP COVER
J057552013-04-16
GENERAL
Kit Number
61400225
Models
For model fitment information, see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com (English only).
WARNINGTo prevent accidental vehicle start-up, which could cause death or serious injury, disconnect battery cables (negative (-) cable first) before proceeding. (00307a)
Kit Contents
See Figures 1 and 2.
Figure 1. Chrome cover
INSTALLATION
| 1. | Remove OEM oil cover by pulling out the bottom of the cover from the grommets and lifting it off of the cooler. Note the grommet oriention and install new grommets from the kit. | |
| 2. | Slide the top of the new chrome water pump cover (1) so that the cover catches behind the top of the water pump. | |
| 3. | Slide down the chrome water pump cover and align the cover studs (2) with the grommets (2) and press studs into the grommets. | |
| 4. | Inspect the grommets to make sure that they have not shifted or popped out of the water pump cover frame. |  Figure 2. Chrome Water Pump Cover |
Table 1. Service Parts
Item | Description (Quantity) | Part Number |
|---|---|---|
1 | Chrome water pump cover assembly | Not Sold Separately |
2 | Grommet,(2) | 11692 |