Coolant Hose Cover Kit
J059232014-06-02
GENERAL
Kit Number
26900107, 26900108
Models
For model fitment information, see the P&A Retail Catalog or harley-davidson.com (English only).
WARNINGRider and passenger safety depend upon the correct installation of this kit.
If the procedure is not within your capabilities or you do not have the correct tools, have a Harley-Davidson dealer perform the installation.
Improper installation of this kit could result in death or serious injury. (00308b)
INSTALLATION
| 1. | See Figure 1. Remove output sprocket cover screw (7) and washer (5). Remove washer from screw. | |
| 2. | Remove ignition coil cover (8). | |
| 3. | Remove two inner ignition coil bracket screws (1). | |
| 4. | Slide coolant hose cover (2) under ignition coil bracket. Cover fits over coolant hoses. | |
| 5. | Loosely install ignition coil bracket screws. | |
| 6. | Place washer removed in step 1 between coolant hose cover tab (3) and sprocket cover (4). | |
| 7. | Place D-washer (6) on sprocket cover screw. | |
| 8. | Loosely install screw and D-washer. | |
| 9. | Tighten sprocket cover screw to 9–11 N·m (80–97 in-lbs). | |
| 10. | Tighten ignition coil bracket screws to 22.5–27.5 N·m (17–20 ft-lbs). | |
| 11. | Install ignition coil cover. |
| 1 | Ignition coil bracket screw |
| 2 | Hose cover |
| 3 | Tab |
| 4 | Sprocket cover |
| 5 | Washer |
| 6 | D-washer |
| 7 | Sprocket cover screw |
| 8 | Ignition coil cover |
Figure 1. Hose Cover
SERVICE PARTS
Figure 2. Service Parts
Table 1. Service Parts
Item | Description (Quantity) | Part Number |
|---|---|---|
1 | Hose cover | Not Sold Separately |
2 | D washer | 10600033 |
Items mentioned in text, but not included in kit. | ||
A | Stock washer | |