0/0
GLOSS BLACK FENDER SUPPORTS
J060532014-05-01
GENERAL
Kit Number
90201206
Additional Parts Required
WARNING
Rider and passenger safety depend upon the correct installation of this kit. Use the appropriate service manual procedures. If the procedure is not within your capabilities or you do not have the correct tools, have a Harley-Davidson dealer perform the installation. Improper installation of this kit could result in death or serious injury. (00333b)
NOTE
This instruction sheet refers to service manual information. A service manual for this year/model motorcycle is required for this installation. Manuals are available from a Harley-Davidson dealer.
Kit Contents
See Figure 1 and Table 1.
INSTALLATION
  1. Follow the service manual instructions to remove the saddlebag supports.
  2. See Figure 1. Install stud receptacles (1) on the brackets (2, 3).
  3. Position insert assembly (4).
  4. Install the saddlebag support (2 or 3) following the instructions in the service manual.
  5. Repeat steps for the opposite side.
  6. Install other components following the instructions in the service manual.
SERVICE PARTS
Figure 1. Service Parts: Saddlebag Support Kit
Table 1. Service Parts Table
Item
Description (Quantity)
Part Number
1
Stud receptacle (4)
10900009
2
Saddlebag support, left
Not sold separately
3
Saddlebag support, right
Not sold separately
4
Insert assembly (2)
90201208