Oil Cooler Cover
J062742017-01-16
GENERAL
Kit Number
25700633, 25700634
Models
For model fitment information, see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com (English only).
Installation Requirements
WARNINGRider and passenger safety depend upon the correct installation of this kit.
If the procedure is not within your capabilities or you do not have the correct tools, have a Harley-Davidson dealer perform the installation.
Improper installation of this kit could result in death or serious injury. (00308b)
Kit Contents
REMOVAL
| 1. | See Figure 1. Remove oil cooler cover (1). a. Pull lower part of cover out and away from motorcycle. b. Detach upper portion of cover from motorcycle. | |
| 2. | Detach wire clips (2) from bracket. | |
| 3. | Remove screws (3). Discard. |
| 1 | Oil cooler cover |
| 2 | Wire clip (2) |
| 3 | Screw (2) |
Figure 1.
INSTALLATION
| 1. | See Figure 2. Install lower bracket (6) with new lower bracket mounting screws (4). Torque: 27.1–29.8 N·m (20–22 ft-lbs) |
| 2. | Install oil cooler cover (2) so that tab (3) of cover fits behind regulator (1). | |
| 3. | Install oil cooler cover mounting screws (5) through cover and into lower bracket (6). Torque: 13.6–14 N·m (120–124 in-lbs) |
| 1 | Regulator |
| 2 | Oil cooler cover |
| 3 | Tab |
| 4 | Lower bracket mounting screw (2) |
| 5 | Oil cooler cover mounting screw (4) |
| 6 | Lower bracket |
Figure 2.
SERVICE PARTS
Table 1. Service Parts Table
Description (Quantity) | Part Number |
|---|---|
Oil cooler cover | Not Sold Separately |
Socket head screw (2) | 3228 |
Button head screw (4) | 4365 |
Lower bracket | Not Sold Separately |