SOFTAIL PASSENGER FOOTPEG MOUNTING KIT
J064022021-11-29
GENERAL
Kit Number
50500769 (black), 50500771 (chrome)
Models
For model fitment information, see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com (English only).
Installation Requirements
WARNINGRider and passenger safety depend upon the correct installation of this kit. Use the appropriate service manual procedures. If the procedure is not within your capabilities or you do not have the correct tools, have a Harley-Davidson dealer perform the installation. Improper installation of this kit could result in death or serious injury. (00333b)
NOTE
This instruction sheet references service manual information. A service manual for this year/model motorcycle is required for this installation. One is available from a Harley-Davidson dealer.
Kit Contents
See Figure 2 and Refer to Table 1.
REMOVAL OF STOCK SUPPORTS (IF EQUIPPED)
| 1. | See Figure 1 Remove e-clip (8) and clevis pin (3) from footpeg support (1). Remove footpeg (5), and retain for later use. | |||||||||||||||||
| 2. | Remove detent plate (4), detent spring (6), and detent ball (7) from footpeg support. | |||||||||||||||||
| 3. | Remove socket head cap screw (2) and footpeg support (1) from vehicle. | 
Figure 1. Softail Passenger Footpeg |
INSTALLATION
Reference Figure 1 for installing new footpeg parts on vehicle.
| 1. | Remove plastic plug in frame, if equipped. | |
| 2. | NOTE Ensure clocking bump on frame matches up with divot on footpeg support. Torque: 50–70 N·m (38–48 ft-lbs) | |
| 3. | NOTE Footpeg was previously removed from vehicle or purchased separately. | |
| 4. | NOTE For proper footpeg operation, the two small holes of detent plate must be on the bottom. | |
| 5. | Align footpeg with footpeg support and install clevis pin (7) and e-clip (5). |
SERVICE PARTS
Figure 2. Service Parts, Passenger Footpeg Mounting Kit
Table 1.
Kit | Item | Description (Quantity) | Part Number |
|---|---|---|---|
50500769 | 1 | Detent Ball (2) | 50500707 |
2 | Detent Spring (2) | 50500706 | |
3 | Detent Plate (2) | Not Sold Separately | |
4 | Socket Head Cap Screw (2) | 4339A | |
5 | E-Clip (2) | 50500701 | |
6 | Passenger Footpeg Support, Black (2) | Not Sold Separately | |
7 | Clevis Pin (2) | 50500702 | |
50500771 | 1 | Detent Ball (2) | 50500707 |
2 | Detent Spring (2) | 50500706 | |
3 | Detent Plate (2) | Not Sold Separately | |
4 | Socket Head Cap Screw (2) | 4339A | |
5 | E-Clip (2) | 50500701 | |
6 | Passenger Footpeg Support, Chrome (2) | Not Sold Separately | |
7 | Clevis Pin (2) | 50500702 |