BLACK NACELLE KIT
J065412017-08-22
GENERAL
Kit Numbers
61300875
Models
For model fitment information, see the P&A retail catalog or the Parts and Accessories section of www.harley-davidson.com (English only).
WARNINGRider and passenger safety depend upon the correct installation of this kit. Use the appropriate service manual procedures. If the procedure is not within your capabilities or you do not have the correct tools, have a Harley-Davidson dealer perform the installation. Improper installation of this kit could result in death or serious injury. (00333b)
NOTE
This instruction sheet references service manual information. A service manual for this year/model motorcycle is required for this installation. One is available from a Harley-Davidson dealer.
PREPARE
WARNINGTo prevent accidental vehicle start-up, which could cause death or serious injury, remove main fuse before proceeding. (00251b)
| 1. | Remove main fuse. See the service manual. |
REMOVE AND INSTALL
| 1. | This kit installs in the same manner as the original equipment (OE) headlamp nacelle. See the service manual to remove and install the headlamp nacelle. |
COMPLETE
| 1. | Install main fuse. See the service manual. |
SERVICE PARTS
Figure 1. Service Parts, Black Nacelle Kit
SERVICE PARTS
Table 1. Service Parts: Black Nacelle Kit
Item | Description (Quantity) | Part Number |
|---|---|---|
1 | Handlebar clamp cover | 55800761 |
2 | Screw | 3225 |
3 | Washer | 6789 |
4 | Nut | 7889 |
5 | Trim (2) | 67700105 |
6 | Left nacelle | 61300097 |
7 | Bezel | No Sold Separately |
8 | Well nut (8) | 5210 |
9 | Right nacelle | 61300098 |
10 | Plug (2) | 71455-11 |
11 | Trim, deco | 61400498 |
12 | Nut | 7888A |