0/0
7 INCH HEADLAMP TRIM
J065942017-08-22
GENERAL
Kit Number
61400432, 61400433, and 61400434
Models
For model fitment information, see the P&A retail catalog or the Parts and Accessories section of www.harley-davidson.com (English only).
Kit Contents
See Table 1 and Figure 2.
INSTALLATION
1. Loosen screw from original equipment headlamp trim ring and remove ring. Set mounting ring aside.
2. See See Figure 1. Assemble trim ring (1) over three headlamp mounting tabs (2).
3. Orient trim so clamp feature is at approximately 15 degrees to the right of bottom.
4. Rotate trim so clamp feature (3) is at bottom. Verify trim engages all three tab locations. Tighten.
Torque: 1.3 N·m (12 in-lbs)
1Clamp
2Headlamp bucket
310200631
Figure 1. Trim Ring
Figure 2. Kit Contents
Table 1. Kit Contents
Item
Description
Part Number
1
Screw
10200631
2
Trim ring
Not Sold Separately