FAT BOB COLLECTOR SHIELD
J066462018-08-20
GENERAL
Kit Number
65400481
Models
For model fitment information, see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com (English only).
Kit Contents
WARNINGRider and passenger safety depend upon the correct installation of this kit.
If the procedure is not within your capabilities or you do not have the correct tools, have a Harley-Davidson dealer perform the installation.
Improper installation of this kit could result in death or serious injury. (00308b)
NOTE
A service manual for the year and model motorcycle is available from a Harley-Davidson dealer.
Installation Requirements
Proper installation of this kit requires the separate purchase of ANTI-SEIZE LUBRICANT (98960-97).
WARNINGRider and passenger safety depend upon the correct installation of this kit. Use the appropriate service manual procedures. If the procedure is not within your capabilities or you do not have the correct tools, have a Harley-Davidson dealer perform the installation. Improper installation of this kit could result in death or serious injury. (00333b)
NOTE
This instruction sheet refers to service manual information. A service manual for your year/model motorcycle is required for this installation. One is available from a Harley-Davidson dealer.
INSTALLATION
Remove Original Equipment (OE) Exhaust Shields
- See Figure 1. Remove six collector shield screws (1) and remove the collector shield (2).
Install Exhaust Shields
| 1. | Apply anti-seize lubricant to screws. | |
| 2. | Install collector shield. | |
| 3. | Install screws. | |
NOTICE Wipe all fingerprints off of exhaust system components after installation and before starting engine. Oil from hands can leave permanent marks on exhaust system finish. (00346a) | ||
| 4. | Secure the screws. Tighten. Torque: 8.8–10.8 N·m (78–96 in-lbs) |
SERVICE PARTS
Figure 1. Service Parts: Dyna Model Exhaust Shields
Table 1. Service Parts Table
Item | Description (Quantity) | Part Number |
|---|---|---|
1 | Screw (6) | 10500103 |
2 | Collector shield kit | Not Sold Separately |
Items mentioned in text, but not included in kit | ||
Not shown | Anti-seize lubricant | 98960-97 |