FXDRS COSMETIC GAUGE REPLACEMENT DECORATIVE PIECE
J067672019-08-21
Table 1.
Kits | Suggested Tools | Skill Level | Time |
|---|---|---|---|
61301141 | Safety Glasses, Torque Wrench |   1 | 1 hour |
(1) Tightening to torque value or other moderate tools and techniques required
KIT CONTENTS
Figure 1. Service Parts: FXDRS Cosmetic Gauge Cover
Table 2. Service Parts List: Rider Backrest Components
 | Item | Qty | Description | Part No. | Notes |
|---|---|---|---|---|---|
 | 1 | 1 | FXDRS Cosmetic gauge cover | Not sold separately | |
| 2 | 2 | Screw, T15 | 10200065 | 1.4–1.9 N·m (12–17 in-lbs) |
GENERAL
NOTE
Verify all contents are present in the kit before installing or removing items from vehicle.
Models
For model fitment information, please see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com (English only).
Make sure you are using the most current version of the instruction sheet which is available at: https://h-d.com/isheets
Contact Harley-Davidson Customer Support Center at 1-800-258-2464 (U.S. only) or 1-414-343-4056.
Installation Requirements
WARNINGRider and passenger safety depend upon the correct installation of this kit.
If the procedure is not within your capabilities or you do not have the correct tools, have a Harley-Davidson dealer perform the installation.
Improper installation of this kit could result in death or serious injury. (00308b)
Separate purchase: Riser top clamp.
INSTALL
| 1. | NOTE Keep the instrument module to be mounted in a separately purchased riser top clamp. | |
| 2. | Install cosmetic gauge cover (1) in place of the OEM dash panel cover. | |
| 3. | Install screws (2). Tighten. Torque: 1.4–1.9 N·m (12–17 in-lbs) Cosmetic gauge cover screw |