SHIFTER PEG KIT
941000302021-11-08
GENERAL INFORMATION
Table 1. General Information
Kits | Suggested Tools | Skill Level(1) |
|---|---|---|
33600306, 33600338 | Safety Glasses, Torque Wrench |  |
(1) Tightening to torque value or other moderate tools and techniques required
KIT CONTENTS
Figure 1. Shifter Peg Kit
Table 2. Shifter Peg Kit Components
 | Item | Qty | Description | Part No. | Notes |
|---|---|---|---|---|---|
 | 1 | 1 | Shifter peg | Not sold separately | |
| 2 | 1 | Screw | 10201061 | Kit 33600306 |
| 10201057 | Kit 33600338 |
NOTE
Verify that all contents are present in the kit before installing or removing items from vehicle.
GENERAL
Models
For model fitment information, see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com (English only).
WARNINGRider and passenger safety depend upon the correct installation of this kit.
If the procedure is not within your capabilities or you do not have the correct tools, have a Harley-Davidson dealer perform the installation.
Improper installation of this kit could result in death or serious injury. (00308b)
REMOVE
| 1. | Remove Original Equipment (OE) shifter peg. |
INSTALL
| 1. | Install new shifter peg (1). | |
| 2. | Rotate shifter peg (1) to the desired orientation. | |
| 3. | Secure new screw (2). Tighten. Torque: 10.5–12 N·m (7.7–8.9 ft-lbs) |