ADVERSARY SHIFT PEG
941001102022-02-22
GENERAL INFORMATION
Table 1. General Information
Kits | Suggested Tools | Skill Level(1) |
|---|---|---|
33600321, 33600322 | Safety Glasses, Torque Wrench |  |
(1) Tightening to torque value or other moderate tools and techniques required
KIT CONTENTS
Figure 1. Kit Contents: Shift Peg
Table 2. Kit Contents: Shift Peg Kit
 | Verify that all contents are present in the kit before installing or removing items from vehicle. | ||||
|---|---|---|---|---|---|
Item | Qty | Description | Part No. | Notes | |
 | 1 | 1 | Shift peg - Black | Not sold separately | |
Shift peg - Gray | |||||
| 2 | 1 | Screw - M6x45 | 10201070 | 10.5–12 N·m (93–106 in-lbs) |
Items mentioned in text, but not included in kit | |||||
| A | 1 | Original Equipment (OE) Shift lever | ||
GENERAL
Models
For model fitment information, see the Parts and Accessories (P&A) Retail Catalog or the Parts and Accessories section of www.harley-davidson.com.
Verify that the most current version of the instruction sheet is used. It is available at: h-d.com/isheets
Contact Harley-Davidson Customer Support Center at 1-800-258-2464 (U.S. only) or 1-414-343-4056.
Installation Requirements
WARNINGRider and passenger safety depend upon the correct installation of this kit.
If the procedure is not within your capabilities or you do not have the correct tools, have a Harley-Davidson dealer perform the installation.
Improper installation of this kit could result in death or serious injury. (00308b)
INSTALL
| 1. | Install new shift peg (1, 2). a. Holding the shift lever (A) in place. b. Align the new shift peg (1) and screw (2) with shift lever. c. Install peg assembly. Tighten. Torque: 10.5–12 N·m (93–106 in-lbs) | |
| 2. | Position vehicle to neutral. |