STEERING DAMPER KIT
941002792021-08-02
GENERAL INFORMATION
Table 1. General Information
Kits | Suggested Tools | Skill Level(1) |
|---|---|---|
45700068 | Safety Glasses, Torque Wrench |  |
(1) Tightening to torque value or other moderate tools and techniques required
KIT CONTENTS
Figure 1. Kit Contents: Steering Damper
Table 2. Kit Contents: Steering Damper
 | Verify that all contents are present in the kit before installing or removing items from vehicle. | ||||
|---|---|---|---|---|---|
Item | Qty | Description | Part No. | Notes | |
 | 1 | 1 | Pivot screw | 10201022 | |
| 2 | 1 | Washer | 10600060 | |
| 3 | 1 | Spacer | 8324 | |
| 4 | 4 | Screw | 10200923 | |
| 5 | 1 | Damper frame bracket | Not sold separately | |
| 6 | 1 | Damper fork bracket | Not sold separately | |
| 7 | 1 | Steering damper | Not sold separately | |
| 8 | 1 | Rod screw | 10201021 | |
GENERAL
Models
Verify that the most current version of the instruction sheet is used. It is available at: h-d.com/isheets
Contact Harley-Davidson Customer Support Center at 1-800-258-2464 (U.S. only) or 1-414-343-4056.
Installation Requirements
WARNINGRider and passenger safety depend upon the correct installation of this kit. Use the appropriate service manual procedures. If the procedure is not within your capabilities or you do not have the correct tools, have a Harley-Davidson dealer perform the installation. Improper installation of this kit could result in death or serious injury. (00333b)
NOTE
This instruction sheet references service manual information. A service manual for the year and model motorcycle is required for this installation and is available from:
- A Harley-Davidson dealer.
- H-D Service Information Portal, a subscription-based access available for most 2001 and newer models. For more information see Frequently ask questions about subscriptions.
PREPARE
| 1. | Remove main fuse. See service manual. | |
| 2. | Remove console. See service manual. |
INSTALL
| 1. | See Figure 2. Install damper fork bracket. a. Position damper fork bracket (9). b. Install screws (8). Tighten. Torque: 10–12 N·m (89–106 in-lbs) Damper mount,
fork bracket screws | |
| 2. | Install damper frame bracket. a. Position damper frame bracket (6). b. Install screws (7). Tighten. Torque: 10–12 N·m (89–106 in-lbs) Damper mount,
frame bracket screws | |
| 3. | Install damper. a. Install damper (5). b. Install spacer (4). c. Install washer (3). d. Install pivot screw (2). Tighten. Torque: 20–22 N·m (15–16 ft-lbs) Steering damper
pivot screw | |
| 4. | Install rod screw (1). Tighten. Torque: 10–12 N·m (89–106 in-lbs) Steering damper rod screw |
| 1 | Rod screw |
| 2 | Pivot screw |
| 3 | Washer |
| 4 | Spacer |
| 5 | Damper |
| 6 | Damper frame bracket |
| 7 | Screw (2) |
| 8 | Screw (2) |
| 9 | Damper fork bracket |
Figure 2. Steering Damper
COMPLETE
| 1. | Install console. See service manual. | |
| 2. | Install main fuse. See service manual. |