WIND DEFLECTOR KIT
941002902021-08-03
GENERAL INFORMATION
Table 1. General Information
Kits | Suggested Tools | Skill Level(1) |
|---|---|---|
55900297 | Safety Glasses, Torque Wrench |  |
(1) Tightening to torque value or other moderate tools and techniques required
KIT CONTENTS
Figure 1. Kit Contents: Wind Deflectors
Table 2. Kit Contents: Wind Deflectors
 | Verify that all contents are present in the kit before installing or removing items from vehicle. | ||||
|---|---|---|---|---|---|
Item | Qty | Description | Part No. | Notes | |
 | 1 | 1 | Left wind deflector | Not sold separately | |
| 2 | 1 | Right wind deflector | Not sold separately | |
| 3 | 4 | Screw, long | 10201021 | |
GENERAL
Models
For model fitment information, see the Parts and Accessories (P&A) Retail Catalog or the Parts and Accessories section of www.harley-davidson.com.
Verify that the most current version of the instruction sheet is used. It is available at: h-d.com/isheets
Contact Harley-Davidson Customer Support Center at 1-800-258-2464 (U.S. only) or 1-414-343-4056.
Installation Requirements
WARNINGRider and passenger safety depend upon the correct installation of this kit.
If the procedure is not within your capabilities or you do not have the correct tools, have a Harley-Davidson dealer perform the installation.
Improper installation of this kit could result in death or serious injury. (00308b)
NOTE
This instruction sheet references service manual information. A service manual for the year and model motorcycle is required for this installation and is available from:
- A Harley-Davidson dealer.
- H-D Service Information Portal, a subscription-based access available for most 2001 and newer models. For more information see Frequently ask questions about subscriptions.
INSTALL
NOTE
Make sure that brake line is not contacting right wind deflector bracket.
| 1. | See Figure 2. Install wind deflector (3). a. Slide into position on end cap (2). b. Position left mounting bracket (4). | |
| 2. | Install screws (1). Tighten. Torque: 7–9 N·m (62–80 in-lbs) Long screws | |
| 3. | Repeat procedure for opposite side. |
| 1 | Long screw (2) |
| 2 | End cap |
| 3 | Wind deflector |
| 4 | Left mounting bracket |
Figure 2. Wind Deflector (left shown)