COMPACT TRAVEL COVER-MEDIUM

941003222022-01-18

GENERAL INFORMATION

Table 1. General Information

Kits	Suggested Tools	Skill Level⁽¹⁾
93100074	Safety Glasses	1 Dark wrench

(1) Only simple tools and techniques required

KIT CONTENTS

Figure 1. Kit Contents: Adjustable Travel Cover

Table 2. Kit Contents: Adjustable Travel Cover

Verify that all contents are present in the kit before installing or removing items from vehicle.
Item	Qty	Description	Part No.	Notes
1	1	Travel cover, medium	Not sold separately
2	1	Travel cover bag	Not sold separately

GENERAL

Models

For model fitment information, see the Parts and Accessories (P&A) Retail Catalog or the Parts and Accessories section of www.harley-davidson.com.

Verify that the most current version of the instruction sheet is used. It is available at: h-d.com/isheets

Contact Harley-Davidson Customer Support Center at 1-800-258-2464 (U.S. only) or 1-414-343-4056.

PREPARE

Park vehicle with steering turned to left.

INSTALL

NOTE

DO NOT INSTALL ON HOT EXHAUST.

Rear of cover has reflective rectangles on outside and care label on inside.

Do not use on vehicle if it is being trailered.

1.	See Figure 2. Drape cover over bike, positioning front over handlebars and windshield (if present).
2.	See Figure 3. Pull cover tight over rear of bike. a. Rear fender, lights or license plate (varies by model). b. Limit cover contacting seating surface. c. Cover can go through or over backrest (if present).
3.	See Figure 4. Attach front elastic cords to each other under steering head. Use plastic clips.
4.	Attach elastic cords (1 per side) over any convenient attachment points. a. See Figure 5 and Figure 6. Foot controls. b. See Figure 7 and Figure 8. Passenger foot pegs and floor boards. c. Engine guard, if equipped.
5.	Elastic cords can be relocated to other holes along edge of cover for better fit. a. If necessary, shorten cords by adding additional knots or retying existing knots.	Figure 2. Side Coverage (typical) Figure 3. Rear Coverage (typical) Figure 4. Down Tube Under Steer Head Tie Down Figure 5. Brake Pedal Tie Down Figure 6. Shifter Tie Down Figure 7. Rider Foot Peg Tie Down Figure 8. Passenger Foot Peg Tie Down

COMPLETE

NOTE

The cover is water resistant and NOT water proofed. Water will seep through the cover if it is allowed to puddle.

When installed cover should have slope to keep water from collecting above the seat area.

MAINTENANCE

NOTE

1.	Brush off normal dirt with cloth.
2.	Spot clean with warm water and mild detergent. Use sponge or terry cloth.
3.	Cover should be thoroughly dried before use.