TIE-DOWN BRACKETS
941004962024-01-23
GENERAL INFORMATION
Table 1. General Information
Kits | Suggested Tools | Skill Level(1) |
|---|---|---|
93500033, 93500036 | Safety Glasses, Torque Wrench |  |
(1) Tightening to torque value or other moderate tools and techniques required
KIT CONTENTS
Figure 1. Kit Contents: Tie-Down Brackets - Touring
Table 2. Kit Contents: Tie-Down Bracket Kit
 | Verify that all contents are present in the kit before installing or removing items from vehicle. | ||||
|---|---|---|---|---|---|
Item | Qty | Description | Part No. | Notes | |
 | 1 | 1 | Tie-down bracket, right | Not sold separately | |
| 2 | 1 | Tie-down bracket, left | Not sold separately | |
| 3 | 4 | Screw, Torx socket, button head, 5/16-18 x 1.125 | 10201438 | |
GENERAL
Models
For model fitment information, see the Parts and Accessories (P&A) Retail Catalog or the Parts and Accessories section of www.harley-davidson.com.
Verify that the most current version of the instruction sheet is used. It is available at: h-d.com/isheets
Contact Harley-Davidson Customer Support Center at 1-800-258-2464 (U.S. only) or 1-414-343-4056.
Installation Requirements
WARNINGRider and passenger safety depend upon the correct installation of this kit.
If the procedure is not within your capabilities or you do not have the correct tools, have a Harley-Davidson dealer perform the installation.
Improper installation of this kit could result in death or serious injury. (00308b)
REMOVE
| 1. | Remove Original Equipment (OE) screws. Discard. |
INSTALL
NOTE
Tie-down brackets are side specific. Brackets install with tie-down slots to the rear, angling outward and down.
| 1. | See Figure 2. Install tie-down bracket (2) and new screws (1). | |
| 2. | Tighten screws. Torque: 17.5–20 N·m (13–15 ft-lbs) | |
| 3. | Repeat steps on opposite side. |
| 1 | Screw (2) |
| 2 | Tie-down bracket |
Figure 2. Tie-down Bracket Install