SHIFTER LINKAGE
J002002018-08-21
GENERAL
Kit Number
See Table 3
Models
Table 1. Model Usage
Fitment (see Table 3) | Models |
|---|---|
A | 1986 and later FL Touring models. 1986 and later Softail models except:
|
B |
|
Kit Contents
See Figure 1 for a list of kit contents.
INSTALLATION
Table 2. Lever Style by Model and Year
Year | Model | Lever Style | |
|---|---|---|---|
Straight | Offset | ||
1998 and earlier | All Dyna, Touring, Softail | X | |
1999 | All Dyna, all Touring | X | |
Softail except FLSTS | X | ||
FLSTS models | X | ||
2000 | All Dyna, all Touring | X | |
Softail except FXSTD, FLSTF, FLSTS | X | ||
FXSTD, FLSTF, FLSTS | X | ||
2001 and later | All Dyna, Touring, Softail | X | |
NOTE
| 1. | Remove the existing shifter rod. | |
| 2. | Adjust the new shifter rod to match the length of the shifter rod just removed by loosening the locknuts (3), adjusting the length of the rod, then re-tightening the locknuts. Tighten. Torque: 27–32 N·m (20–24 ft-lbs) hex locknut | |
| 3. | With STRAIGHT rear shifter rod lever: Discard the spacer (7). Place the cover (1) over the shifter rod lever. With OFFSET rear shifter rod lever: Place the spacer (7) and cover (1) over the shifter rod lever. | |
| 4. | Apply threadlocker to the threads of one of the cap screws (5), and thread the screw through the rear of the shifter rod and into the shifter rod lever. Secure screw (5). Tighten. Torque: 18–22 N·m (13–16 ft-lbs) hex head cap screw LOCTITE 243 MEDIUM STRENGTH THREADLOCKER AND SEALANT (BLUE) (99642-97) | |
| 5. | On 1999 and later FLHT, FLHR, and FXDWG models, place the rod end on the outside of the shifter lever, then apply threadlocker to the threads of the other cap screw (5), and attach the front of the shifter rod (6) to the shifter lever with the screw (5) and acorn nut (4) in the order shown in Figure 1 (acorn nut facing out). Secure acorn nut (4). Tighten. Torque: 18–22 N·m (13–16 ft-lbs) hex acorn nut LOCTITE 243 MEDIUM STRENGTH THREADLOCKER AND SEALANT (BLUE) (99642-97) | |
| 6. | On all models except 1999 and later FLHT, FLHR, and FXDWG, place the rod end on the inside of the shifter lever, then apply threadlocker to the threads of the other cap screw (5), and attach the front of the shifter rod (6) to the shifter lever with the screw (5) and acorn nut (4) as shown. Secure acorn nut (4). Tighten. Torque: 18–22 N·m (13–16 ft-lbs) hex acorn nut LOCTITE 243 MEDIUM STRENGTH THREADLOCKER AND SEALANT (BLUE) (99642-97) |
Table 3. Kit Style and Fitment
Kit Number | Linkage Style | Model Fitment |
|---|---|---|
22760-98A | Slotted | A |
33761-98A | Slotted | B |
33762-98A | Ball Mill | A |
33763-98A | Ball Mill | B |
33799-02 | Scripted | B |
33801-02 | Scripted | A |
33807-05 | Buckshot | A |
33814-98A | Round | A |
33815-98A | Round | B |
33817-98A | Twisted | A |
33818-98A | Twisted | B |
33819-98A | Hex | A |
33820-98A | Hex | B |
33821-98A | Diamond | A |
33822-98A | Diamond | B |
33838-02 | Flame | B |
33840-02 | Flame | A |
33844-02 | Ultra | A |
33845-02 | Classic | A |
33846-02 | Road Glide | A |
33851-02 | Road King | A |
33852-02 | Softail | A |
33853-02 | Deuce | A |
33854-02 | Fat Boy | A |
33855-02 | Springer | A |
33865-02 | Dyna | B |
33884-07 | Smooth with Bar and Shield | A |
34018-08 | Slotted Black | A |
34604-02 | Bullet | A |
34848-05 | Skull | B |
34850-05 | Skull | A |
33600259 | Black | A |
SERVICE PARTS
Figure 1. Service Parts: Shifter Linkage
Table 4. Service Parts Table
Items | Description (Quantity) | Part Number |
|---|---|---|
1 | Shifter rod lever cover (polished) Shifter rod lever cover (black) | 33890-99A 34022-08 |
2 | Self-aligning rod end, female thread (2) Self-aligning rod end, male thread (2) | 33888-99 33899-08 |
3 | Locknut (for female rod ends) (2) Locknut (for male rod ends) (2) | 33889-99 7326 |
4 | Acorn nut | 7904 |
5 | Cap screw (2) | 4192 |
6 | Shifter rod | Not sold separately |
7 | Spacer | 5826 |
Items not included in kits: | ||
A | Original equipment shifter lever | |
B | Original equipment shifter rod lever (on transmission) | |
Notes: | ||
C | Item 7 used on the following: | |
1999 FLSTS models | ||
2000 FXSTD, FLSTF and FLSTS models, and all 2001 and later Dyna, Touring and Softail models | ||
D | Apply LOCTITE 243 MEDIUM STRENGTH THREADLOCKER AND SEALANT (BLUE) (99642-97) to threads of cap screws, item 5. | |
Note | Items included in kits are shown shaded in Figure 1. | |