Nostalgic Brake Pedal Pad
J007272013-11-01
GENERAL
Kit Number
44248-96
Models
For model fitment information, see the P&A retail catalog or the Parts and Accessories section of www.harley-davidson.com (English only).
Kit Contents
Table 1. Service Parts
Item | Description (Quantity) | Part Number |
|---|---|---|
1 | Brake pedal cover (1) | 44249-96 |
2 | Rubber tread (1) | 44251-96 |
3 | Bolt (with rubber H-D logo) (1) | 44229-95 |
4 | Washer, 7/8 in. OD (1) | 6422 |
5 | Washer, 5/8 in. OD (1) | 6316HW |
6 | Offset washer (1) | 6421 |
7 | Acorn nut (1) | 7946 |
All Service Parts are listed above.
INSTALLATION
- Remove previously installed brake pedal cover from motorcycle.
- Align and place brake pedal cover over rubber tread.
- Insert bolt, with rubber logo properly aligned, into hole in combined new brake pedal cover and rubber tread.
- Place 5/8 in. OD flat washer onto bolt first, followed by 7/8 in. OD washer.
- Place new brake pedal cover and bolt/washer assembly on brake pedal.
- Place offset washer on bolt.
- Adjust and hold offset washer in position covering exposed slot under brake pedal and attach acorn nut to bolt. Tighten to 33.8–39.3 N·m (25–29 ft-lbs).