0/0
Nostalgic Twin Cam 88 Air Cleaner Cover
J017402006-09-06
GENERAL
Kit Number
29550-99, 29552-99, 29765-01, 29829-XXXXX
Models
For model fitment information, please see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com (English only).
Additional Parts Required
If this kit will be installed with Screamin' Eagle Twin Cam 88 high flow air cleaner kits, the separate purchase of Service Gasket, part number 29591-99 is required. This part is available for purchase from any Harley-Davidson Dealer.
Kit Contents
See Figure 1 and Table 1.
There are no Service Parts available with this kit.
INSTALLATION
  1. Remove current air cleaner cover and screw.
  2. See Figure 1. Coat threads of screw (1) from kit with Loctite® 243 (blue) (Harley-Davidson part number 99642-97). Install new air cleaner cover (2) with screw (1). If this kit will be installed with a Screamin' Eagle Twin Cam 88 high flow air cleaner kit, place the self adhering gasket (must be purchased separately) inside the cover between the air filter and the cover. Tighten screw to 36-60 in-lbs (4.1-6.8 Nm).
SERVICE PARTS
Figure 1. Service Parts: Nostalgic Twin Cam 88 Air Cleaner Cover
Table 1. Service Parts Table
Item
Description (Quantity)
Part Number
1
Screw (black)
Not Sold Separately
2
Cover
Not Sold Separately
3
Warning label (factory installed)
Not sold separately