0/0
Billet Air-Cleaner Side-Insert Kit
J023632007-02-16
GENERAL
Kit Number
97002-02, 97005-02
Models
For model fitment information, please see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com (English only).
Additional Parts Required
Isopropyl alcohol is required for proper installation of this kit.
WARNING
Rider and passenger safety depend upon the correct installation of this kit. Use the appropriate service manual procedures. If the procedure is not within your capabilities or you do not have the correct tools, have a Harley-Davidson dealer perform the installation. Improper installation of this kit could result in death or serious injury. (00333b)
NOTE
A Service Manual for your model motorcycle is available from a Harley-Davidson Dealer.
Kit Contents
See Figure 1 and Table 1.
There are no Service Parts available with this kit.
INSTALLATION
NOTE
If you are installing a new Chrome Billet Air Cleaner Cover kit with this kit, install the inserts from this kit instead of the inserts from the cover kit. Otherwise, install the inserts from this kit directly on top of the Chrome Billet Air Cleaner Cover kit inserts.
  1. See Figure 1. Clean the insert areas (B) on the billet air cleaner (A) with isopropyl alcohol. Allow the cleaned areas to dry thoroughly.
  2. Facing the air-cleaner cover from the right side of the vehicle, remove the adhesive backing from the left-side insert (1) and carefully position it on the air-cleaner cover. Apply pressure to the insert for one minute.
  3. Repeat Step 2 for the right-side insert (2).
SERVICE PARTS
Figure 1. Service Parts: Billet Air-Cleaner Side-Insert Kit
Table 1. Service Parts
Item
Description (Quantity)
Part Number
1
Insert, left-side
Not Sold Separately
2
Insert, right-side
Not Sold Separately
Items mentioned in text, but not included in kit.
A
Billet air cleaner cover, chrome
B
Insert area