BULLET TURN SIGNAL TRIM RING KITS
J024192009-01-27
GENERAL
Kit Number
69736-02, 69757-05, 73344-09
Models
For model fitment information, see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com (English only).
NOTE
These kits are used only in the United States and Canada.
Kit Contents
There are no service parts available for these kits.
INSTALLATION
- See Figure 1. Place a standard screwdriver tip into notch (A) on turn signal lens (B) to pry lens from bullet-style turn signal housing (C).
- Position the trim turn signal lens over the turn signal housing with the pry notch positioned at the bottom of the turn signal.
- Press lens into turn signal housing.
- Repeat for opposite turn signal.
NOTE
Press on the outer edges of the lens, not on the chrome trim ring around the lens, until the lens snaps into the housing.
Figure 1. Bullet Turn Signal Trim Ring Kit
Table 1. Bullet Turn Signal Trim Ring Kit
Item | Description (Quantity) | Part Number |
|---|---|---|
Kit 69736-02 | ||
1 | Turn signal trim ring, chrome | Not Sold Separately |
Kit 69757-05 | ||
1 | Turn signal trim ring with visor, chrome | Not Sold Separately |
Kit 73344-09 | ||
1 | Turn signal trim ring with visor, black | Not Sold Separately |
Items mentioned in text, but not included in kit: | ||
A | Pry notch (on turn signal lens) | |
B | Red lens | |
C | Turn signal housing | |