RIDER FOOTBOARD KIT
J031712011-10-10
GENERAL
Kit Number
50634-05, 50500158
Models
For model fitment information, see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com (English only).
NOTE
There may be decreased access to the jiffy stand tab on Softail models.
Kit Contents
This kit contains the following items:
Table 1. Service Parts Table
Kit | Item | Description (Quantity) | Part Number |
|---|---|---|---|
Kit 50634-05 | 1 | Footboard assembly (right) | 50698-05 |
2 | Footboard assembly (left) | 50699-05 | |
3 | Shoulder bolt, 1/4-20 x 1-3/32 in. (4) | 50674-05 | |
4 | Lock nut, flanged, 1/4-20 (4) | 7716 | |
Kit 50500158 | 1 | Footboard assembly (right) | 50500159 |
2 | Footboard assembly (left) | 50500160 |
| 1 | Left-side footboard |
| 2 | Right-side footboard |
Figure 1. Footboard Installation
INSTALLATION
| 1. | Remove the two hinge bolts and locknuts attaching the existing footboard to the mounting brackets, and remove the footboard. For kit 50634-05, discard stock bolts and locknuts. | |
| 2. | Clean and inspect the footboard brackets, and replace if worn, rusted or damaged. | |
| 3. | Set the correct footboard (see Figure 1) in place over the mounting brackets. Line up the holes and install the shoulder bolts and locknuts from the kit. Tighten to 9–12 N·m (7–9 ft-lbs). Reuse stock shoulder bolts and nuts for 50500158. | |
| 4. | Check that the footboard pivots freely on the hinge bolts. | |
| 5. | Repeat for the opposite side. |
NOTE
Avoid contacting chrome surfaces with abrasive materials (stones, sand, etc.) as damage will result