CHROME SWINGARM
J044342010-06-23
GENERAL
Kit Number
48663-08, 48607-08A
Models
For model fitment information, see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com (English only).
Additional Parts Required
WARNINGRider and passenger safety depend upon the correct installation of this kit. Use the appropriate service manual procedures. If the procedure is not within your capabilities or you do not have the correct tools, have a Harley-Davidson dealer perform the installation. Improper installation of this kit could result in death or serious injury. (00333b)
NOTE
This instruction sheet references service manual information. A service manual for your model motorcycle is required for this installation and is available from a Harley-Davidson dealer.
Kit Contents
Table 1. Kit Contents
Description (Quantity) | Part Number |
|---|---|
Rear fork (swingarm) | Not sold separately |
INSTALLATION
Follow the instructions given in the REAR FORK section of the service manual to remove and install the rear wheel, rear brake caliper, rear shock absorber bolts, evaporative emissions (EVAP) system charcoal canister (on California models), and rear fork.
The rear fork in this kit installs in the same way as the original equipment rear fork.
Pay close attention to all warnings, cautions, and torque specifications when installing this rear fork.
| 1 | Rear fork (swingarm) |
Figure 1. Chrome Swingarm