TRI-BAR RUN AND BRAKE LIGHT
J049602009-06-05
GENERAL
Kit Number
67774-10
Models
For model fitment information, see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com (English only).
Kit Contents
There are no Service Parts available with this kit.
Figure 1. Tri-Bar Run and Brake Light
| 1 | Shield |
| 2 | TORX screws (2) |
| 3 | Rear fascia lamp |
Figure 2. Rear Fascia Lamp
REMOVAL
- See Figure 2. Remove shield (1), and disconnect rear lights harness and tail light jumper harness from fascia lamp (3).
- Remove two screws (2) and fascia lamp.
INSTALLATION
| 1. | Install new fascia run/brake light with the two T-20 TORX® screws and alternately tighten to 2–2.5 N·m (18–22 in-lbs). | |
| 2. | Connect rear lights harness and tail lamp jumper harness to fascia lamp. | |
| 3. | Install shield. |