1. | See Figure 1. Remove and discard the original air cleaner cover screw. | |
2. | Remove and discard the original air cleaner trim ring from the front of the air cleaner cover. Any adhesive that remains on the air cleaner cover can be removed with mineral spirits. | |
3. | Carefully pry the Bar & Shield emblem (5) off of the new air cleaner trim ring (1) to expose the screw (2) and bushing (3). | |
4. | Apply a drop of Loctite® 243 (blue) to the threads of the screw (2). Use the screw and bushing (3) to loosely install the new air cleaner trim ring as shown. | |
5. | Align the trim ring so the Bar & Shield emblem recess is level with the ground. Tighten the screw to 4.1–6.8 N·m (36–60 in-lbs). | |
6. | Secure the Bar & Shield emblem to the trim ring by snapping it into place. |
Item | Description (Quantity) | Part Number |
---|---|---|
1 | Trim ring, air cleaner cover, Diamond Ice | Not sold separately |
2 | Screw | 4092 |
3 | Bushing | Not sold separately |
4 | Dual-Lock® tape | Not sold separately |
5 | Insert, air cleaner trim ring, Diamond Ice Bar & Shield | Not sold separately |