0/0
DETACHABLE SADDLEBAG STORAGE BRACKET KIT
J052612012-03-07
GENERAL
Kit Number
93100002, 93100032
Models
For model fitment information, see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com (English only).
Kit Contents
See Figure 1 and Table 1.
INSTALLATION
NOTE
These brackets are designed to fit in a garage with the stud centerlines set sixteen inches apart. Mounting can also be done using a backing board mounted to the studs that are non-standard.
  1. See Figure 1 and Table 1. Install the front docking point (5) to the hole in the bracket (1) using the nut (3), washer (2) and screw (7).
  2. Install the rear docking point (6) to the bracket channel using the nut, washer and screw. Leave the screw loose to allow the docking point to slide in the channel of the bracket.
  3. Choose a mounting location and locate the stud center lines. Secure the bracket to the studs (or backing board) with lag bolts (4).
  4. Attach the saddlebag to the front docking point and align the rear docking point to fit the saddlebag. Tighten the rear docking point.
  5. Mount the saddlebag to the docking points in the same manner as being mounted to the motorcycle.
  6. Repeat steps 1 through 4 for the opposite saddlebag.
SERVICE PARTS
Figure 1. Service Parts
Table 1. Service Parts Table
Kit
Item
Description (Quantity)
Part Number
Kit 93100002
1
Bracket (2)
Not Sold Separately
2
Washer (4)
6701
3
Hex lock nut (4)
7778
4
Lag bolt, 3/8 x 1.50 inch (4)
Not Sold Separately
5
Front docking point
53683-96
6
Rear docking point
53684-96A
7
Hex socket button head screw (4)
4246
Kit 93100032
1
Bracket (2)
Not Sold Separately
2
Washer (4)
6701
3
Hex lock nut (4)
7778
4
Lag bolt, 3/8 x 1.50 inch (4)
Not Sold Separately
5
Front docking point
90200485
6
Rear docking point
90200486
8
Button head cap screw - short (2)
4203
9
Button head cap screw - long (2)
4215