MIRROR KITS
J054142024-01-24
GENERAL INFORMATION
Table 1. General Information
Kits | Suggested Tools | Skill Level(1) |
|---|---|---|
91315-04, 91657-02, 91696-05A, 91697-06A, 91965-98, 92096-05, 92190-06, 92398-09, 92410-09, 92416-08, 92423-08, 92441-10, 56000006, 56000090, 56000135, 56000136, 56000137, 56000171, 56000262, 56000294, 56000301, 56000305, 56000343, 56000344 | Safety Glasses, Torque Wrench |  |
(1) Tightening to torque value or other moderate tools and techniques required
KIT CONTENTS
Figure 1. Kit Contents: Mirror Kits
Table 2. Kit Contents: Mirror Kits
 | Verify that all contents are present in the kit before installing or removing items from vehicle. | ||||
|---|---|---|---|---|---|
Item | Qty | Description | Part No. | Notes | |
 | 1 | 4 | Flat washer | 6771A (silver) 6926 (black) | For all other kits |
| 2 | Flat washer, black | 12404 (black) | Kits 56000135, 56000171, 56000294, 5600305 | |
| 2 | 2 | Lockwasher | 7127 (silver) 7155 (black) | |
| 7155 | Kit 56000301 | |||
| 3 | 2 | Acorn nut | 7736 (silver) 8196 (black) | |
| 7331 (silver) | Kit 56000301 | |||
| 7352 (black) | Kits 56000135, 56000294, 56000305 | |||
| 10400082 (black) | Kits 56000343, 56000344 | |||
| 4 | 1 | Mirror, left / right | Not sold separately | Kits 91315-04 (Willie G Skull, Chrome), 91965-98 (Aluminator), 92190-06 (Split Vision), 92398-09 (Tribal Black), 92410-09 (Tribal, Chrome), 92441-10 (Edge Cut Stem), 56000006 (Slipstream), 56000090 (Edge Cut Dome), 56000171 (Willie G Skull, Blk) |
| Mirror, left Mirror, right | 91928-03 91927-03 | Kit 91657-02 (Bullet) | ||
| Mirror, left Mirror, right | 92176-05A 92175-05A | Kit 91696-05A (Tailfin) | ||
| Mirror, left Mirror, right | 92063-06A 92062-06A | Kit 91697-06A (Profile Custom) | ||
| Mirror, left Mirror, right | 91949-05 91987-05 | Kit 92096-05 (Buckshot Chrome) | ||
| Mirror, left Mirror, right | 92417-08 92419-08 | Kit 92416-08 (Buckshot Black) | ||
| Mirror, left Mirror, right | 92424-08 92426-08 | Kit 92423-08 (Dome Billet) | ||
| Mirror, left Mirror, right | 56000125 56000126 | Kit 56000135 (Airflow, Black) | ||
| Mirror, left Mirror, right | 56000138 56000139 | Kit 56000136 (Dominion, Black) | ||
| Mirror, left Mirror, right | 56000146 56000147 | Kit 56000137 (Dominion, Bronze) | ||
| Mirror, left Mirror, right | 56000274 56000275 | Kit 56000262 (66 Collection, Black) | ||
| Mirror, left Mirror, right | 56000300 56000295 | Kit 56000294 (Empire, Black) | ||
| Mirror, left Mirror, right | 56000302 56000306 | Kit 56000301 (Empire, Chrome) | ||
| Mirror, left Mirror, right | 56000303 56000299 | Kit 56000305 (Empire, Black Edge Cut) | ||
| Mirror, left Mirror, right | 56000372 56000370 | Kit 56000343 (Switchback, Black) | ||
| Mirror, left Mirror, right | 56000373 56000371 | Kit 56000344 (Switchback, Silver) | ||
| 5 | 2 | Adjustment screw | Not sold separately | |
GENERAL
Models
For model fitment information, see the Parts and Accessories (P&A) Retail Catalog or the Parts and Accessories section of www.harley-davidson.com.
Verify that the most current version of the instruction sheet is used. It is available at: h-d.com/isheets
Contact Harley-Davidson Customer Support Center at 1-800-258-2464 (U.S. only) or 1-414-343-4056.
Installation Requirements
WARNINGRider and passenger safety depend upon the correct installation of this kit.
If the procedure is not within your capabilities or you do not have the correct tools, have a Harley-Davidson dealer perform the installation.
Improper installation of this kit could result in death or serious injury. (00308b)
XG MODELS
REMOVE
| 1. | See Figure 2. Remove mirror. a. Remove mirror (1). b. Remove tube nut (3). c. Remove mirror mount (4). |
INSTALL
| 1. | See Figure 2. Install mirror. a. Install mirror mount (4). Tighten. Torque: 11.7–14.3 N·m (104–127 in-lbs) b. Install tube nut (3) to mirror stem (2). Hand tighten. c. Install mirror and tube nut to mirror mount. Hand tighten. d. Adjust mirror. e. Tighten tube nut. Torque: 11.7–14.3 N·m (104–127 in-lbs) |
| 1 | Mirror |
| 2 | Mirror stem |
| 3 | Tube nut |
| 4 | Mirror mount |
Figure 2. Mirror
ALL OTHER MODELS
REMOVE
| 1. | Remove and discard existing mirror. a. Discard any lockwashers and acorn nuts used to mount Original Equipment (OE) mirror. |
INSTALL
| 1. | See Figure 1. Install flat washer (1) on mirror stud (top position) for all mirrors expect Part No. 91696-05A, 92398-09 and 92410-09. | |
| 2. | Vehicles with turn signals mounted to underside of hand lever housings (except 2004 and later XL models): Secure left side mirror with lockwasher (2) and acorn nut (3) from kit. | |
| 3. | Secure right side mirror with lockwasher (2) and acorn nut (3) from kit and turn signal retainer only. | |
| 4. | Vehicles with turn signals mounted away from hand lever housings: Insert mirror studs into holes in hand lever housings. a. Secure mirrors with flat washers (1) in top and bottom positions, lockwashers (2) and acorn nuts (3) from kit. | |
| 5. | Adjust mirrors for proper field of vision and tighten. Check adjustment and reposition if necessary. NOTE Harley-Davidson Motor Company cannot test, and make specific fitment recommendations concerning every possible mirror, and handlebar combination. Therefore, after installing new mirrors or handlebars and before operating vehicle, check that mirrors provide operator a clear view to the rear. a. Tighten acorn nut (3). Torque: 14–16 N·m (10–12 ft-lbs) |
Mirror Pivot Adjustment
| 1. | Kits 56000136, 56000137, 56000171: Adjust pivot tension. a. See Figure 1. Incrementally torque adjustment screws (5) as required. Tighten. Torque: 1.1–4 N·m (10–35 in-lbs) b. Check mirror pivot resistance and continue to torque as needed. Do not exceed 35 in-lbs. |