CHISEL FRONT BRAKE ROTOR KIT
J054662011-05-20
GENERAL
Kit Numbers
41500040, 41500042
Models
For model fitment information, see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com (English only).
Additional Parts Required
Loctite® 243 Threadlocker and Sealant (Blue) (Part No. 99642-97) is required for installation of this kit. Loctite is available from a Harley-Davidson dealer.
Kit Contents
Table 1. Kit Contents
Item | Description | Part Number |
|---|---|---|
1 | Kit 41500040 Front brake rotor, polished | Not Sold Separately |
Kit 41500042 - Front brake rotor, unpolished | 41300019 | |
2 | TORX® shoulder bolt, chrome (7) | 12600056 |
3 | Spring washer (7) | 6966M |
INSTALLATION
| 1. | Refer to the service manual for brake disc removal and disassembly procedures. | |
NOTICE Do not re-use brake disc/rotor screws. Re-using these screws can result in torque loss and damage to brake components. (00319c) | ||
| 2. | Apply Loctite 243 Threadlocker and Sealant (blue) to the threads of the new screws from the kit. Install the brake disc using ONLY the new screws. | |
| 3. | Tighten screws to 33.9–43.4 N·m (25–32 ft-lbs). Allow Loctite to cure according to the manufacturer's recommendations. NOTE Avoid hard stops for the first 300 miles. Hard stops during wear-in period will gall brake discs. |