1. | Models with main fuse: See the service manual to install the main fuse. Models with main circuit breaker: See the service manual to attach the negative battery cable. Apply a light coat of Electrical Contact Lube (Part No. 99861-02) or equivalent to battery terminals. | |
2. | Test the Electra Glo Trim Ring for proper operation: a. Turn ignition switch OFF. Trim ring LEDs are OFF. b. Turn ignition switch to ACC. Trim ring LEDs are ON. c. Turn ignition switch ON. Trim ring LEDs are ON. | |
WARNING After installing seat, pull upward on seat to be sure it is locked in position. While riding, a loose seat can shift causing loss of control, which could result in death or serious injury. (00070b) | ||
3. | See the service manual to install the seat. |
1 | Socket housing |
2 | Secondary lock |
3 | Locking tab (button) |
4 | Cavity |
5 | Socket terminal |
6 | Slot |
7 | Crimp tails |
Item | Description (Quantity) | Part Number |
---|---|---|
1 | Electra Glo trim ring, 7 in | Not sold separately |
2 | Two-way socket housing | 73152-96BK |
3 | Wire harness, headlamp trim ring | 69200602 |
4 | Cable strap (4) | 10065 |
5 | Clip, adhesive back (2) | 10102 |
Item mentioned in text. | ||
A | Trim ring wiring and socket terminals |