BURST COLLECTION SHIFTER PEG KIT

J056602012-05-28

GENERAL

Kit Number

33600032

Models

For model fitment information, see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com (English only).

Additional Parts Required

Loctite^® 243 Threadlocker and Sealer (Part No. 99642-97) is required for installation of this kit. Loctite is available from a Harley-Davidson dealer.

Kit Contents

See Figure 1 and Table 1.

INSTALLATION

1.	Remove and discard old shifter peg and stud.
2.	Clean internal threads and remove any residual sealant from the shift lever.
3.	Apply a small amount of Loctite 243 to the threads of the bolt (1).
4.	Install new shifter peg and tighten bolt to 27.1–32.5 N·m (20–24 ft-lbs).

SERVICE PARTS

Figure 1. Service Parts: Burst Collection Shifter Peg Kit

Table 1. Service Parts

Item	Description (Quantity)	Part Number
1	Screw, chrome, 5/16-24 x 2.5 in	94365-92TS
2	Shifter peg body	Not Sold Separately
3	Rubber pad	Not Sold Separately