WINDSHIELD TRIM
J057562018-01-16
GENERAL
Kit Number
61400224, 61300358, 61400593
Models
For model fitment information, see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com (English only).
WARNINGRider and passenger safety depend upon the correct installation of this kit.
If the procedure is not within your capabilities or you do not have the correct tools, have a Harley-Davidson dealer perform the installation.
Improper installation of this kit could result in death or serious injury. (00308b)
INSTALLATION
| 1. | See Figure 1. Remove three original equipment (OE) screws and washers. Discard. | |
| 2. | Install windshield trim (6), washer (2) and center screw (5). Do not tighten at this time. | |
| 3. | Center the windshield trim on the fairing and install end screws (1) and washers (2). | |
| 4. | NOTE Do not over-tighten screws. Torque: 2.8–3.4 N·m (25–30 in-lbs) center screw | |
| 5. | Tighten end screws. Torque: 2.8–3.4 N·m (25–30 in-lbs) center screw |
SERVICE PARTS
Figure 1. Windshield Trim
Table 1. Service Parts Table
Item | Description (Quantity) | Part Number |
|---|---|---|
1 | Screw, Stainless (2) | 4976 |
Screw, Black (2) | 10200679 | |
2 | Washer, Stainless (3) | 6383 |
Washer, Black (3) | 10300156 | |
3 | Pad (2) | 6549 |
4 | Pad (3) | 10300036 |
5 | Screw, Stainless | 10500034 |
Screw, Black | 10200678 | |
6 | Windshield trim | Not Sold Separately |