1. | See Figure 1. Remove the original muffler end cap. Retain the three clip nuts (A). See the service manual. | |
2. | Slide the three clip nuts (A) onto the bosses of the end cap mounting ring (2). | |
3. | Install mounting ring into end cap (1). Align holes. | |
4. | Align holes in end cap (1) with those in muffler (B). Slide end cap into muffler body. | |
5. | Install the three screws (3). Tighten securely. | |
NOTICE Wipe all fingerprints off of exhaust system components after installation and before starting engine. Oil from hands can leave permanent marks on exhaust system finish. (00346a) | ||
6. | Wipe end cap and muffler to remove fingerprints and any other oils or dirt. |
Item | Description (Quantity) | Part Number |
---|---|---|
1 | End cap | not serviced separately |
2 | Mounting ring | not serviced separately |
3 | Screw M6 X 1.0 X 14 (3) | not serviced separately |
Items mentioned but not included in kit | ||
A | Clip nuts | 10400025 |
B | Muffler |