RIDER FOOTBOARD KIT
J061532024-04-25
GENERAL
Kit Number
50500436, 50501150, 50501227, 50501265
Models
For model fitment information, see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com (English only).
NOTE
There may be decreased access to the jiffy stand tab on Softail models.
Installation Requirements
FLTRXSTSE models: Separate purchase of Front Support Mounts (Part No. 47200202A - qty of 2) is required. See service manual for removal of old front supports and install of new supports.
WARNINGRider and passenger safety depend upon the correct installation of this kit.
If the procedure is not within your capabilities or you do not have the correct tools, have a Harley-Davidson dealer perform the installation.
Improper installation of this kit could result in death or serious injury. (00308b)
INSTALLATION
| 1. | Remove the two hinge bolts and locknuts attaching the existing footboard to the mounting brackets Remove the footboard. Save the hardware for installation. | |
| 2. | 2016 and earlier Touring only: Remove existing front mounts. Install new front mounts from the kit using the original hardware. Tighten. Torque: 9–12 N·m (60–80 in-lbs) NOTE Wear pegs are only required on Touring models with lowered suspension. | |
| 3. | Assemble footboard assembly (2) into footboard bottom (4) by pulling rubber mount flange through the mounting hole. Install the wear peg. Tighten. Torque: 5.4–8.1 N·m (4–6 ft-lbs) | |
| 4. | See Figure 1. Set the correct footboard in place over the mounting brackets. Align the holes and install the pivot screws and nuts removed in Step 1. Nuts should be on the inboard side. | |
| 5. | Tighten. Torque: 9–12 N·m (60–80 in-lbs) | |
| 6. | Check that the footboard pivots freely on the hinge bolts. | |
| 7. | Repeat for the opposite side. |
Figure 1. Service Parts: Rider Footboard (Kits 50500436 and 50501265)
Table 1. Service Parts: Kits 50500436 and 50501265
Item | Description (Quantity) | Part Number |
|---|---|---|
1 | Bracket assembly (2) | 47200302A |
2 | Footboard assembly, right, Chrome Footboard assembly, right, Black | 50500343 50501018 |
Footboard assembly, left, Chrome (not shown) Footboard assembly, left, Black (not shown) | 50500347 50501019 | |
3 | Wear peg (2) | 33130-07A |
4 | Footboard bottom, right | 50500348 |
Footboard bottom, left (not shown) | 50500349 |
Figure 2. Service Parts: Rider Footboard (Kits 50501150 and 50501227)
Table 2. Service Parts: Kits 50501150 and 50501227
Item | Description (Quantity) | Part Number |
|---|---|---|
1 | Bracket assembly (2) | 47200302A |
2 | Footboard assembly, right, Chrome Footboard assembly, right, Black | 50501218 50501216 |
Footboard assembly, left, Chrome (not shown) Footboard assembly, left, Black (not shown) | 50501219 50501217 | |
3 | Wear peg (2) | 33130-07A |
4 | Footboard bottom, right, Chrome Footboard bottom, right, Black | 50501220 |
Footboard bottom, left, Chrome (not shown) Footboard bottom, left, Black (not shown) | 50501221 | |
5 | Medallion, right Medallion, left (not shown) | 50501223 50501224 |