CHROME INSTRUMENT BEZEL COVER KIT
J004672006-06-16
GENERAL
Kit Number
74550-92T
Models
This kit is designed for installation on voltmeter, fuel gauge, oil pressure and air temperature gauges used on 1986 and later FLT and FLHT models.
Kit Contents
Table 1. Kit Contents
Quantity | Description |
|---|---|
2 | Chrome bezel cover |
1 | Adhesive tape, double-sided strip |
There are no Service Parts available with this kit.
INSTALLATION
NOTE
Using a 50:50 mixture of isopropyl alcohol and water, wipe dirt, oil and grease off of instrument bezel and bezel cover before applying double-sided tape or tape may not adhere well.
- See Figure 1. Cut tape (1) into six equal pieces.
- Remove paper liner from one side of tape and apply tape to front face of gauge pressing firmly into place. Space all three pieces equally.
- Remove outer liner from tape.
- Place bezel over gauge and press firmly into place.
| 1 | Tape |
| 2 | Instrument bezel |
| 3 | Instrument bezel cover |
Figure 1. Chrome Instrument Bezel Installation